APPLIANCE REPAIR NEW YORK

Viking Fridge Diagnostic Details

Solution Diagnostics Mode enables you to identify the firmware and software variations, examination status of “version certain” system components as well as sensing units, and also alter state of parts where relevant (i.e.– compressor on/off, and so on.).

Enabling Service Mode: To enable Solution Setting, press and also hold the “WARMER” switch while pushing the “COLDER” button 4 times within five secs.

• You can not allow Service Setting while in Establish Setting. – All system features will stay in their current state while in Service Mode.
• Alarms are disabled throughout Solution Mode and reset after leaving Service Setting.
• Solution Mode will automatically disable after 5 (5) mins of no keypad access

After going into Service Mode, the first number that you will see shows the software application version number for the particular system you are servicing. For instance, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the first number you will certainly see is 11. See graph below for corresponding model and also software program reference.

The 2nd number you will see shows the software program version launch. As an example, if you see 44 on the display panel it indicates software program version 4.4.

Diagnostics:
While in Service Setting, press the “COLLECTION” button to tip with Tests 0-9. The very first digit of the screen will certainly reveal the examination number. The 2nd figure indicates the existing state of each part under test as well as is presented as “1” getting on, CLOSED, or SHORTED and also “0” being OFF or OPEN. Examinations 0 as well as 1 disclose an open or shorted condition discovered at the sensing unit inputs. Examinations 2 through 6 allow you to turn loads ON with the “WARMER” button as well as OFF with the “COLDER” switch. Tests 7 via 9 validate state change of the door switches over and/or magnetic reed sensing unit. The part examinations offered are described in Offered Component Tests chart.