APPLIANCE REPAIR NEW YORK

Refrigerator Repair

Oven Repair

Dryer Repair

Washer Repair

MORE APPLIANCES

The contemporary commercial giant Bosch launches high-quality strategy. These gadgets are trusted, long lasting and also useful. As Well As Nexxt 300 Collection washing machine proves it. The crucial features of the supplier’s offer:

the large capability of laundry;
the availability of a variety of programs to perform optimal washing;
high spin rate;
energy efficiency, which conserves as much as 70% of electricity;
use much less water for cleaning.

*Bosch nexxt 300 series washer error codes* – How to fix? by ApplianceRepairNow.nyc

Based on these advantages, the tool has acquired immense popularity among individuals. Yet also such a trustworthy washing machine is not immune from failures and also breakdowns. Bosch Nexxt 300 series washing machine offers mistake codes in various scenarios. To recognize just what the tool “does not like”, we provide a full listing of codes as well as their definitions. It connects to various procedures.

Utilize the table to recognize exactly how to get rid of the problem. You can fix some of them by yourself. Various other tasks may require the assistance of qualified specialists, which fix Bosch production.

Fault	Possible cause	Action
The door cannot be opened.	“No final spin” selected.	Select Drain or Spin.
	Power failure.	An interrupted program will be resumed when power is restored. If the laundry is to be removed during a power failure
	Program is running and/or the door is locked for safety reasons.	Wait until the program ends
	Plug is loose or not inserted.	Eliminate the cause.
	Program selector turned to Off before end of program.	Select a program.
Door cannot be opened, even though the appliance has been switched off and on again.	For safety reasons the door has been locked because the water level, temperature or speed is too high.
Control lights do not light up.	A fuse has blown.	Replace the fuse of the individual circuit.
	Power failure.	An interrupted program will be resumed when power is restored. If the laundry is to be removed during a power failure
Program does not start. Start/Pause indicator light flashes.	Start/Pause button not pressed.	Press the Start/Pause button.
Program does not start. Indicator light “end” is lit and display is flashing E:01	Door not closed properly.	Check whether laundry is trapped in door. Close the door (a click should be heard). Program continues.
Spin speed cannot be selected.	Spinning is already in progress; during spin cycle the speed cannot be changed.	Select speed before spinning.
	Program selector is set to drain; spin cycle is not possible with this program.	If required, select another program.
Water does not enter the machine or detergent is not washed away. Indicator light “spin” is lit and display is flashing “E:02″ or “E:03″.	Water tap(s) not turned on.	Turn on water tap(s) and press Start/Pause button. Program continues.
	Supply hose kinked or pinched.	Eliminate the cause.
	Strainers in supply hose clogged.	Clean the water inlet strainers
	Water pressure too low.	Eliminate the cause.
Water cannot be seen in drum.	This is not a fault. The water level is below the visible part of the drum.
Indicator light “rinse” is lit and display is flashing “E:04” with no water remaining in tub.	Suds or pump is blocked.	Use less detergent for future wash loads. Detergents specifically designed for you High Efficiency washer produce fewer suds and will include the letters “HE” on the packaging. Clean the water drainage pipe and/or drain hose. Turn the program selector to “off” and restart Drain program.
Water is flowing out from underneath the machine.	The thread of the supply hose is not tight.	Tighten the thread.
	Leak in the drain hose.	Replace the drain hose.
Suds coming out of the detergent dispenser.	Too much soap or non-HE soap used, pump could not remove suds.	Mix 1 tablespoon of fabric softener with 1 pt (1/2 litre) of water and pour into detergent dispenser III. Use less detergent for future wash loads. Detergents specifically designed for you High Efficiency washer produce fewer suds and will include the letters “HE” on the packaging.
Repeated spinning.	This is not a fault. The imbalance compensation system is attempting to balance the load through repeated spins.	Always load the drum with large and small items together.
The laundry was not spun.	Large items of clothing have become entangled and could not be distributed evenly in the drum. For safety reasons the high-speed spin cycle was automatically suppressed.	Always load the drum with large and small items together.
Program duration extended.	This is not a fault. The suds detection feature has activated an additional rinsing cycle to reduce the amount of suds.	Add a more appropriate amount of detergent.
	This is not a fault. The imbalance compensation system is attempting to balance the load through repeated spins.	Always load the drum with large and small items together.
Unsatisfactory washing result.	The degree of soiling was higher than estimated.	Select suitable program or Heavy duty as an additional option.
	Not enough detergent.	Add detergent according to the manufacturer’s specifications.
Detergent residue on the laundry.	Some phosphate-free detergents contain water-insoluble residues that may appear as light spots on the laundry.	Brush off spots when laundry is dry.
Gray residue on the laundry.	Dirt accumulation from ointments, fats or oils.	Add the maximum amount of detergent and select the highest permissible temperature.
System shakes or shudders when passing from lower to higher speed spinning.	Drum system suspension can shift during speed up, this is not a failure.	Mix small and large laundry pieces in load to minimize this effect.