APPLIANCE REPAIR NEW YORK

Refrigerator Repair

Oven Repair

Dryer Repair

Washer Repair

MORE APPLIANCES

Is your Sub-Zero refrigerator displaying an error code? Sub-Zero fridges have actually built in analysis systems. If your fridge locates, sees, or discovers a fault or mistake in the system, it will show an error or mistake code. The mistake code will present either inside the refrigerator where the temp controls are or where the typical numbers get on the display screen. When an error code is presented, your refrigerator is informing you a details fault. If the error or mistake is not reparable by you, it will require a repair service technician.

here are many different model numbers of Sub-Zero refrigerators with digital displays so if you see an error code write down what is flashing or displaying. Don’t pull the power from the fridge if it shows an error code. If you pull the power plug it will erase the fault code.

Source Of Error Code EC40: Fridge Freezer Excessive Compressor Running

Cause of Mistake Code EC50: Fridge Excessive Compressor Running

What you will see on your fridge: EC-40 and also Service Flashing on control board

What you will see on your fridge: EC-50 as well as Service Flashing on screen

To GET RID OF the mistake code and reset your fridge:
Press and also hold the door ajar alarm secret for 15 seconds to clear the code
If the mistake continues, after that there is a concern with the fridge

Exactly how to deal with Subzero EC 40 & EC 50 mistake codes:
1– If temperatures are high as well as the door on your fridge has not been left open
Call Sub-Zero factory solution
2– If the temperatures are near normal range:
a– Tidy the condenser of dust or dust
b– Press as well as hold the door open alarm system key for 15 seconds to clear the mistake code
c– Ensure the kick plate is not covered or enclosed in custom-made kitchen cabinetry

If the error code returns or the temperatures rises, there is no more troubleshooting guidance
Call Sub-Zero manufacturing facility solution

**SubZero error code inside fridge top panel**

**SubZero error code inner refrigerator on lcd screen**

Sub-Zero 600 Collection and also 700 Series

Sub-Zero Mistake code: EC21EC24
Cause of error code: Defrost Functionality Problem
Option 1: If temperatures are high call for service.
Service 2: If temperature levels are near regular variety:
a– Clean the condenser
b– Press and also hold the door ajar alarm system trick for 15 secs to remove the error code
c– If EC Service light shows up, or temperatures climb contact solution for repair service

Sub Absolutely No Refrigerator 400-2 as well as 427r-2

Error Code: EE Solution (Flashing).
Reason: Refrigerator area thermistor fault.

Error Code:38 Solution (Flashing).
Cause: Several extreme compressor run times or Below No Refrigerator evaporator thermistor mistake.

Error Code:38 Solution (Steady, not Flashing).
Cause: A number of excessive compressor run times or Sub Absolutely no Fridge evaporator thermistor mistake.

Remedy: To clear mistakes, first repair or repair part after that transform unit OFF and back ON.

To clear the error code press bell ON/OFF key for 15 seconds.

SubZero Refrigerator 600 Series (Before Serial # 1810000).

Error Code: EE Solution (Blinking) 38.
Cause: SubZero Freezer compartment thermistor fault.

Mistake Code:00 Solution (Blinking) EE.
Reason: SubZero Refrigerator compartment thermistor mistake.

Error Code:00 ICE (Flashing) 38.
Cause: Water shutoff stimulant longer than 15 seconds– Sub-Zero icemaker system handicapped.

A 45 min halt time happens each ice manufacturer cycle (no power is going to icemaker).

To bypass 45 minute dwell switch the unit OFF then back ON.

SubZero Fridge Freezer 600 Collection (Begins With Serial # 1810000).

Error Code: EE Service (Flashing) 38.
Cause: SubZero Fridge freezer compartment thermistor fault.

Error Code:00 Solution (Blinking) EE.
Reason: SubZero Refrigerator area thermistor fault.

Error Code:00 Solution (Flashing) 38.
Reason: Several extreme compressor run durations or SubZero fridge evaporator thermistor mistake.

Mistake Code:00 Ice (Flashing) 38.
Trigger: Water shutoff invigorated longer then 15 secs– Sub-Zero icemaker system handicapped.

A 45 minute halt time takes place each ice maker cycle (no power is mosting likely to icemaker).

To bypass 45 minute dwell change the system OFF after that back ON.

Sub-Zero Fridge Freezer 600-2 COLLECTION.

Mistake Code: EE Solution (Flashing) 38.
Cause: SubZero Freezer area thermistor fault.

Error Code:00 Solution (Blinking) EE.
Reason: SubZero Refrigerator compartment thermistor mistake.

Error Code:00 Solution (Blinking) 38.
Cause: Numerous excessive compressor run periods or SubZero Fridge evaporator fault.

Mistake Code:00 Ice (Flashing) 38.
Trigger: Water shutoff energized longer then 15 seconds, 5 successive times– Sub-Zero icemaker system disabled 24 hr each time.

A 45 min halt time takes place each ice manufacturer cycle (no power is going to icemaker).

To bypass 45 minute dwell switch over the system OFF then back ON.

Mistake Code:00 Solution (Steady, not Blinking) 38.
To clear error code press bell ON/OFF trick for 15 seconds.

SubZero Fridge Freezer 700 SERIES.

Control is shut down. Press COLDER secret to start the device.

Mistake Code: -20.
-20 = Zone/Compartment thermistor mistake– Repair electrical wiring or change thermistor.

Mistake Code:55.
55 = Zone/Compartment thermistor shorted– Repair circuitry or change thermistor.

Mistake Code: Su.
Su = Blue wire of display screen cable television unhooked or malfunctioning fixing circuitry.

Mistake Code: -88.
-88 = Red Wire of display cable unhooked or damaged, top lights are off and also keys are faulty repair electrical wiring.

Sub-Zero Fridge Freezer 700-2 COLLECTION (High Units).

Mistake Code: EE Service (Flashing) 38.
Cause: SubZero Freezer area thermistor Mistake.

Error Code:00 Solution (Flashing) EE.
Reason: SubZero Fridge compartment thermistor mistake.

Error Code:00 Service (Blinking) 38.
Cause: A number of too much compressor run periods or SubZero Fridge evaporator fault.

Error Code:00 Ice (Flashing) 38.
Trigger: Water shutoff energized longer after that 15 seconds– SubZero Icemaker system impaired.

A 45 minute stop time takes place each ice manufacturer cycle (no power is going to icemaker).

To bypass 45 minute dwell switch over the system OFF then back ON.

SubZero Refrigerator Freezer 700-3 SERIES (HIGH DEVICES).

Mistake Code: EE Solution (Flashing) 38.
Cause: SubZero Freezer compartment thermistor mistake.

Error Code:00 Solution (Flashing) EE.
Cause: SubZero Fridge area thermistor mistake.

Mistake Code:00 Solution (Flashing) 38.
Reason: Numerous excessive compressor run duration or SubZero Refrigerator evaporator thermistor mistake.

Mistake Code:00 Ice (Flashing) 38.
Create: Water shutoff invigorated longer then 15 seconds, 5 consecutive times– Icemaker system impaired 24 hours each time.

A 45 minute halt time happens each ice maker cycle (no power is mosting likely to icemaker).

To bypass 45 minute dwell switch over the unit OFF then back ON.

Error Code:00 Service (Steady, not Blinking) 38.
To clear error code press bell ON/OFF trick for 15 seconds.

SubZero Refrigerator Evaporator Repair & Replacement – Not cooling defrosting

Sub-Zero Refrigerator not cooling – dirty condenser – compressor overheating

DIY Sub Zero Refrigerator Icemaker Repair

Do It Yourself Sub Absolutely No Fridge Icemaker Repair Work.

**SubZero fridge front display dispenser**

Do you know of any other Sub-Zero fridge error codes we have not mentioned or are you having difficulty with your Below Zero fridge? Please leave an inquiry or comment below and also we can aid.