APPLIANCE REPAIR NEW YORK
Sub-Zero is the epitome of design and efficiency refrigeration. It isn’t simply a device, your Sub-Zero is an essential element of your best kitchen. It makes sense that you wouldn’t intend to trust your refrigerator to just any appliance repair work business. You desire a group of Sub-Zero fridge repair experts that can shield your financial investment while supplying the premium service you are entitled to.
It Is Fixed Appliance Repair is the firm you must rely on with every one of your Sub-Zero repair needs. Our service technicians focus on Sub-Zero service so you can trust that we have the skills to get the job done right.
HOW TO USE THE ERROR CODE TROUBLESHOOTING OVERVIEW
Error Codes suggest problems registered by particular parts. If error codes are signed up, they will certainly appear before temperature level readings while in Diagnostic Mode.
NOTE: If Error Codes appear with a blinking “SOLUTION” annunciator prior to starting Diagnostic Setting, the system experienced extreme compressor run condition that might or may not be associated with the Mistake Codes presented
To start Diagnostic Setting, press and hold either COLDER key, after that press the POWER secret, then launch both keys. Currently, examine to see if Error Codes exist, being sure to toggle with all mistake as well as temperature readings by pushing either COLDER vital or either WARMER trick. (See Mistake Code Table Below).
If Error Codes appear throughout Diagnostic Setting, comply with the Mistake Code Troubleshooting Guide on the adhering to page. The left column of the troubleshooting overview lists the mistake codes. The details in the ideal column explains what examinations to do and/or what action to take to deal with the mistake.
NOTE: If error codes are observed in analysis setting, a non-flashing SOLUTION annunciator will appear on the LCD when Diagnostic Mode finishes, indicating mistake codes are still stored. Mistake Codes should be removed from the digital control memory by hand. To remove the non-flashing SOLUTION annunciator as well as the mistake codes, the trouble should be corrected and also the unit has to get on, then:.
- On a version UC-24C: Press the Fridge Freezer WARMER and also COLDER keys for fifteen (15) seconds.
- On a design UC-24B, UC-24R, or UC-24RO: Press the Fridge WARMER and COLDER tricks for fifteen (15) seconds.
Error Code Table
| CODE | INDICATION |
| 05 | Refrig. cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 06 | Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 07 | Freezer cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 08 | Freezer evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 20 | Defrost under-heat with no voltage feedback through Gray/White wire at defrost start |
| 21 | Defrost overheat |
| 22 | No voltage feedback through Gray/White wire at defrost start |
| 23 | Defrost overheat with no voltage feedback through Gray/White wire at defrost start |
| 24 | Defrost under-heat |
| 30 | N/A |
| 40 | Excessive Freezer Compressor Run |
| 50 | Excessive Refrigerator Compressor Run |
| Error Code | CAUSE | SOLUTION |
| Error Code 08 | Inconsistent temperature readings in the refrigerator or freezer cabinet. | The issue may be caused by loose or faulty connections between the thermistor and the control board, or it may mean the thermistor is faulty. Refer to your owner’s manual to locate the thermistor, and ensure the wires between the thermistor and control panel are securely connected. If you do not have your original manual, you may be able to find a digital copy online. If the connections are secure, the thermistor and control panel will need to be tested to ensure functionality. Testing requires the use of a multimeter. You may need the assistance of a specialist trained in Sub-Zero refrigerator repair to diagnose and replace the faulty components. |
Error Code 08
A. If “EE” for refrigerator area was displayed as well as “SOLUTION” flashing, examine the following:.
- Thermistor electrical connections as well as continuity from thermistor to J5 on control panel. Reconnect/ fixing.
- Resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F( 0 ° C). Replace if faulty. B. If “EE” for refrigerator area was NOT showed, trouble is periodic thermistor mistake:.
- Door not shutting properly. Right door closing trouble.
- Inspect light switch, circuitry & electric links. Fixing wiring/ links or change button.
- Inspect thermistor electrical connections and also connection at J5 on control panel. Reconnect/ repair work.
- Examine resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F (0 ° C). Change if faulty.
C. If “EC 05” as well as “SOLUTION” were flashing prior to launching analysis setting, device additionally experienced extreme compressor run problem that may or may not be connected with the “05” Error Code. See Error Code 50 Test/Actions.
