APPLIANCE REPAIR NEW YORK
Sub-Zero is the epitome of style as well as efficiency refrigeration. It isn’t just a device, your Sub-Zero is an essential element of your excellent kitchen area. It makes sense that you wouldn’t wish to trust your fridge to simply any type of home appliance fixing business. You want a group of Sub-Zero fridge repair work professionals that can protect your investment while providing the costs solution you are worthy of.
It Is Fixed Device Repair service is the company you need to rely on with every one of your Sub-Zero repair service needs. Our service technicians focus on Sub-Zero solution so you can trust that we have the abilities to finish the job right.
HOW TO USAGE THE ERROR CODE TROUBLESHOOTING OVERVIEW
Error Codes indicate issues registered by specific components. If mistake codes are signed up, they will appear prior to temperature level readings while in Diagnostic Mode.
KEEP IN MIND: If Mistake Codes appear with a blinking “SERVICE” annunciator prior to initiating Diagnostic Mode, the system experienced too much compressor run condition that may or may not be associated with the Mistake Codes presented
To start Diagnostic Setting, press and also hold either COLDER trick, then press the POWER trick, then release both secrets. Currently, inspect to see if Error Codes are present, making sure to toggle via all mistake and temperature readings by pushing either COLDER crucial or either WARMER secret. (See Error Code Table Below).
If Mistake Codes show up during Diagnostic Setting, adhere to the Error Code Troubleshooting Guide on the complying with web page. The left column of the troubleshooting guide lists the error codes. The information in the appropriate column describes what tests to carry out and/or what action to require to remedy the mistake.
NOTE: If error codes are observed in diagnostic mode, a non-flashing SOLUTION annunciator will certainly show up on the LCD when Diagnostic Mode ends, showing mistake codes are still saved. Error Codes must be gotten rid of from the digital control memory by hand. To clear the non-flashing SOLUTION annunciator as well as the error codes, the trouble has to be corrected as well as the unit should get on, then:.
- On a version UC-24C: Press the Freezer WARMER and COLDER keys for fifteen (15) secs.
- On a version UC-24B, UC-24R, or UC-24RO: Press the Fridge WARMER as well as COLDER tricks for fifteen (15) secs.
Error Code Table
| CODE | INDICATION |
| 05 | Refrig. cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 06 | Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 07 | Freezer cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 08 | Freezer evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 20 | Defrost under-heat with no voltage feedback through Gray/White wire at defrost start |
| 21 | Defrost overheat |
| 22 | No voltage feedback through Gray/White wire at defrost start |
| 23 | Defrost overheat with no voltage feedback through Gray/White wire at defrost start |
| 24 | Defrost under-heat |
| 30 | N/A |
| 40 | Excessive Freezer Compressor Run |
| 50 | Excessive Refrigerator Compressor Run |
| Error Code | CAUSE | SOLUTION |
| Error Code 38 | Multiple (greater than 5) instances of excessive compressor runtime. | Inspect the thermistor and compressor for malfunctions. |
Error Code 38
A. If “EE” for fridge area was presented and “SOLUTION” flashing, examine the following:.
- Thermistor electrical links and connection from thermistor to J5 on control panel. Reconnect/ repair.
- Resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F( 0 ° C). Change if malfunctioning. B. If “EE” for fridge compartment was NOT displayed, issue is intermittent thermistor error:.
- Door not shutting correctly. Appropriate door closing issue.
- Check light switch, wiring & electric connections. Fixing electrical wiring/ links or change button.
- Inspect thermistor electrical connections and also connection at J5 on control panel. Reconnect/ fixing.
- Inspect resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F (0 ° C). Change if malfunctioning.
C. If “EC 05” as well as “SERVICE” were blinking prior to launching analysis setting, system likewise experienced excessive compressor run condition that might or may not be associated with the “05” Error Code. See Error Code 50 Test/Actions.
