Our work is hinged on the values of integrity, high quality, and customer satisfaction. Hence, you can never go wrong when choose to use our services!
Honest, high quality work that you can afford. We know how to treat you right, give you exceptional service, and follow through with our promises. Our philosophy has always been to treat everyone like we would want to be treated.
Our mission is to serve our clients and provide them with their appliances repaired in a cost effective fashion. We believe in the importance of well cared for appliances inside the your home setting and are doing our best to make the appliance repair experience fast and friendly.
Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Fridge Diagnostic Details
Solution Diagnostics Mode enables you to identify the firmware as well as software versions, test status of “model particular” system components as well as sensing units, as well as transform state of components where appropriate (i.e.– compressor on/off, and so on.).
Enabling Solution Mode: To allow Service Setting, press and also hold the “WARMER” button while pressing the “COLDER” button four times within five seconds.
After going into Service Setting, the initial number that you will see shows the software program design number for the particular system you are servicing. For example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the first number you will certainly see is 11. See graph listed below for equivalent model as well as software application reference.
The 2nd number you will certainly see indicates the software variation release. For instance, if you see 44 on the screen panel it indicates software version 4.4.
Diagnostics:
While in Service Setting, press the “SET” switch to tip with Examinations 0-9. The very first figure of the screen will certainly reveal the test number. The 2nd figure indicates the present state of each part under examination and also is presented as “1” being ON, CLOSED, or SHORTED as well as “0” being OFF or OPEN. Tests 0 and also 1 reveal an open or shorted condition detected at the sensing unit inputs. Examinations 2 through 6 permit you to turn tons ON with the “WARMER” switch and OFF with the “COLDER” switch. Examinations 7 via 9 validate state change of the door changes and/or magnetic reed sensing unit. The element tests offered are defined in Readily available Component Tests graph.
PROBLEM | POSSIBLE CAUSE | WHAT TO DO |
Refrigerator still won’t operate | Refrigerator is malfunctioning | Unplug refrigerator and transfer food to another refrigerator. If another refrigerator is not available, place dry ice in freezer section to preserve food. Warranty does not cover food loss. Contact service for assistance. |