Our work is hinged on the values of integrity, high quality, and customer satisfaction. Hence, you can never go wrong when choose to use our services!
Honest, high quality work that you can afford. We know how to treat you right, give you exceptional service, and follow through with our promises. Our philosophy has always been to treat everyone like we would want to be treated.
Our mission is to serve our clients and provide them with their appliances repaired in a cost effective fashion. We believe in the importance of well cared for appliances inside the your home setting and are doing our best to make the appliance repair experience fast and friendly.
|Model||Description||Software Model Number|
|DFUW, DUWC, VUWC||24 inch Wine Cellar||11|
|DFUR, DUAR, VUAR||24 inch Beverage Center||21|
|DFRD, DURD, VURD||24 inch Refrigerated Drawers||16|
Viking Fridge Diagnostic Info
Solution Diagnostics Mode permits you to recognize the firmware and also software application versions, test standing of “model certain” system elements as well as sensors, and change state of elements where appropriate (i.e.– compressor on/off, and so on.).
Enabling Solution Setting: To make it possible for Solution Setting, press and hold the “WARMER” button while pressing the “COLDER” switch four times within 5 seconds.
After going into Solution Mode, the very first number that you will certainly see suggests the software application version number for the particular device you are servicing. For example, if you are servicing a 24 inch wine rack (DFUW, DUWC, VUWC), the very first number you will see is 11. See chart below for corresponding model and also software application recommendation.
The second number you will see indicates the software application version launch. For instance, if you see 44 on the screen panel it indicates software version 4.4.
While in Service Setting, press the “SET” button to step via Examinations 0-9. The initial number of the screen will certainly show the test number. The second figure suggests the current state of each part under test and also is displayed as “1” getting on, CLOSED, or SHORTED and also “0” being OFF or OPEN. Tests 0 and 1 reveal an open or shorted condition found at the sensing unit inputs. Tests 2 through 6 permit you to transform loads ON with the “WARMER” button and OFF with the “COLDER” button. Examinations 7 via 9 validate state change of the door switches over and/or magnetic reed sensor. The component examinations readily available are explained in Available Part Examinations graph.
|PROBLEM||POSSIBLE CAUSE||WHAT TO DO|
|Refrigerator has an odor||Compartment is dirty or has odor causing food.||Clean it|