Our work is hinged on the values of integrity, high quality, and customer satisfaction. Hence, you can never go wrong when choose to use our services!
Honest, high quality work that you can afford. We know how to treat you right, give you exceptional service, and follow through with our promises. Our philosophy has always been to treat everyone like we would want to be treated.
Our mission is to serve our clients and provide them with their appliances repaired in a cost effective fashion. We believe in the importance of well cared for appliances inside the your home setting and are doing our best to make the appliance repair experience fast and friendly.
Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Fridge Diagnostic Info
Solution Diagnostics Mode permits you to recognize the firmware and also software application versions, examination condition of “design particular” system elements and also sensors, and change state of elements where relevant (i.e.– compressor on/off, and so on.).
Enabling Solution Setting: To allow Service Mode, press and hold the “WARMER” button while pushing the “COLDER” button 4 times within five secs.
After going into Solution Mode, the first number that you will see shows the software program version number for the particular system you are servicing. As an example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the initial number you will see is 11. See graph below for matching model and software referral.
The 2nd number you will certainly see shows the software program version launch. As an example, if you see 44 on the screen panel it indicates software variation 4.4.
Diagnostics:
While in Service Setting, press the “COLLECTION” switch to tip through Examinations 0-9. The very first figure of the screen will reveal the test number. The 2nd figure suggests the current state of each component under examination and is presented as “1” being ON, CLOSED, or SHORTED and “0” being OFF or OPEN. Examinations 0 and also 1 expose an open or shorted problem identified at the sensing unit inputs. Examinations 2 through 6 allow you to turn lots ON with the “WARMER” button and OFF with the “COLDER” button. Examinations 7 with 9 validate state change of the door switches over and/or magnetic reed sensing unit. The component examinations offered are explained in Readily available Element Tests chart.
PROBLEM | POSSIBLE CAUSE | WHAT TO DO |
Refrigerator or ice maker makes unfamiliar sounds or seems too loud | Normal operation |