APPLIANCE REPAIR NEW YORK

Viking Fridge Diagnostic Details

Solution Diagnostics Mode enables you to identify the firmware and software program variations, test standing of “version particular” system parts and sensors, and also change state of components where applicable (i.e.– compressor on/off, and so on.).

Enabling Solution Mode: To enable Service Mode, press and hold the “WARMER” switch while pushing the “COLDER” button four times within 5 seconds.

• You can not allow Service Setting while in Establish Mode. – All system functions will stay in their current state while in Service Mode.
• Alarms are impaired during Service Setting and also reset after exiting Solution Setting.
• Service Mode will instantly disable after five (5) mins of no keypad access

After getting in Solution Mode, the initial number that you will see indicates the software application version number for the particular device you are servicing. For example, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the first number you will certainly see is 11. See graph below for equivalent version and software reference.

The 2nd number you will certainly see suggests the software application variation launch. For instance, if you see 44 on the screen panel it shows software version 4.4.

Diagnostics:
While in Service Setting, press the “COLLECTION” button to tip through Examinations 0-9. The first figure of the screen will certainly reveal the test number. The second figure suggests the current state of each element under examination as well as is presented as “1” being ON, CLOSED, or SHORTED as well as “0” being OFF or OPEN. Tests 0 as well as 1 disclose an open or shorted problem spotted at the sensor inputs. Examinations 2 with 6 permit you to transform loads ON with the “WARMER” button as well as OFF with the “COLDER” button. Examinations 7 via 9 validate state change of the door changes and/or magnetic reed sensing unit. The element examinations offered are described in Readily available Component Examinations chart.