WHY CHOOSE US?

Our work is hinged on the values of integrity, high quality, and customer satisfaction. Hence, you can never go wrong when choose to use our services!

Honest, high quality work that you can afford. We know how to treat you right, give you exceptional service, and follow through with our promises. Our philosophy has always been to treat everyone like we would want to be treated.

Our mission is to serve our clients and provide them with their appliances repaired in a cost effective fashion. We believe in the importance of well cared for appliances inside the your home setting and are doing our best to make the appliance repair experience fast and friendly.

APPLIANCE REPAIR NEW YORK

Refrigerator Repair

Oven Repair

Dryer Repair

Washer Repair

MORE APPLIANCES

Software Model Number

Model	Description	Software Model Number
DFUW, DUWC, VUWC	24 inch Wine Cellar	11
DFUR, DUAR, VUAR	24 inch Beverage Center	21
DFRD, DURD, VURD	24 inch Refrigerated Drawers	16

Viking Fridge Diagnostic Details

Solution Diagnostics Mode enables you to recognize the firmware as well as software program versions, examination standing of “design certain” system parts and also sensors, and change state of elements where relevant (i.e.– compressor on/off, etc.).

Enabling Solution Setting: To enable Solution Mode, press and hold the “WARMER” switch while pressing the “COLDER” switch 4 times within 5 secs.

You can not allow Service Mode while in Establish Setting. – All system features will certainly stay in their present state while in Service Mode.
Alarm systems are handicapped during Service Setting as well as reset after leaving Service Setting.
Service Mode will instantly disable after 5 (5) minutes of no keypad access

After going into Service Setting, the first number that you will see suggests the software program version number for the particular system you are servicing. For instance, if you are servicing a 24 inch wine rack (DFUW, DUWC, VUWC), the very first number you will see is 11. See graph below for equivalent version as well as software referral.

The second number you will certainly see shows the software application version release. For instance, if you see 44 on the display screen panel it shows software variation 4.4.

Diagnostics:
While in Service Mode, press the “COLLECTION” switch to tip through Tests 0-9. The very first figure of the display screen will show the test number. The 2nd number suggests the present state of each component under test and also is displayed as “1” being ON, CLOSED, or SHORTED as well as “0” being OFF or OPEN. Examinations 0 and also 1 disclose an open or shorted problem spotted at the sensing unit inputs. Examinations 2 with 6 permit you to turn lots ON with the “WARMER” button and OFF with the “COLDER” switch. Examinations 7 via 9 validate state change of the door switches over and/or magnetic reed sensor. The element examinations readily available are defined in Available Component Examinations chart.

SOUND	POSSIBLE CAUSE	SOLUTION
Vibrating noise	Compressor makes a pulsating sound while running	Normal operation
	Refrigerator is not level	See Installation Instructions for details on how to level your refrigerator.